BLU-BIT – Air-water heat exchangers for vertical or roof mounting
A cooling element is used for BLU-BIT air-water heat exchangers to cool the air inside the control cabinet enclosure. The heat conducted from the control cabinet is not released into the environment but is instead removed by a water return pipe so that it can, for instance, be reused in a heat recovery unit.
This type of cooling is often used for control cabinet enclosures if water cooling is used for other systems such as hydraulic oil, transmission oil or high-frequency spindles in addition to the electronics. In the majority of cases the cooling water required is produced by a water cooling system “in the self-contained circuit”.
Available cooling capacities from 2500 to 15000 W.
Data sheets
Request offer
- OSK 600 General informations BLU-BIT - Air-water heat exchanger cooling units for door or wall and roof mounting (557.1 KiB)
- OSK 605 BIT 25 - Air-water heat exchangers Cooling capacity to 2500 W (235.2 KiB)
- OSK 610 BLU 10 - Air-water heat exchangers Cooling capacity to 1000 W (252.8 KiB)
- OSK 618 BLU 18 - Air-water heat exchangers Cooling capacity to 1750 W (245.2 KiB)
- OSK 625 BLU 25 - Air-water heat exchangers Cooling capacity to 2500 W (241.5 KiB)
- OSK 635 BLU 35 - Air-water heat exchangers Cooling capacity to 3500 W (242.0 KiB)
- OSK 645 BLU 45 - Air-water heat exchangers Cooling capacity to 4500 W (240.3 KiB)
- OSK 660 BLU 60 - Air-water heat exchangers Cooling capacity to 6000 W (308.5 KiB)
- OSK 680 BLU A0 - Air-water heat exchangers Cooling capacity to 10000 W (226.4 KiB)
- OSK 685 BLU A5 - Air-water heat exchangers Cooling capacity to 15000 W (240.9 KiB)
- OSK 690 BLU B5 - Air-water heat exchangers Cooling capacity to 25000 W (450.1 KiB)